| Type | Icon | Product example | Description |
| P1 |  |
 |
Closed (tube) extruded aluminium profile |
| P2 |  |
 |
The shell consists of two equal extruded parts |
| P3 |  |
 |
Horizontally divided profile from two different extruded parts |
| P4 |  |
 |
U-form opened extruded profile and and flat cover plate |
| P5 |  |
 |
Slope closed (tube) extruded aluminium profile |
| P6 |  |
 |
Slope two-part extruded profile |
| P7 |  |
 |
Extruded sidewalls; upper and lower part of the shell made of aluminium sheet |
Aluminium profile enclosures 170 x 90 mm
The table displays the standard aluminium enclosures, based on extruded profiles. It allows to get any length of the enclosures you want.
Below you the enclosures based on extruded profiles with cross section W × H = 170 × 90 mm.
All the dimensions are in mm.
Nearest neighbors:
| 100 | |||
| 90 | | 180×90 2 series |
|
| 80 | 160×80 2 series |
||
| 160 | 170 | 180 |
| Part number | Width | Height | Type | Front/end panels | Max PCB width | Max height inside | IP max | Comment | |
| 1 | Tekam 5 | 167 | 82 | P2 | Aluminium die cast flat or flanged with recession | 160 | 72,9 | | |
| 2 | ABP1680 | 169 | 82 | P1 | Die cast aluminium flat; avail. mounting lid with hinged aluminium flap | 160 | 73 | IP65 | EMC sealing is available |
| 3 | ABPU1680 | 169 | 82 | P4 | Die cast aluminium flat; avail. mounting lid with hinged aluminium flap | 160 | 72,8 | IP40 | EMC sealing is available |
| 4 | ABPH1680 | 169 | 82 | P3 | Die cast aluminium flat; avail. mounting lid with hinged aluminium flap | 160 | 73 | IP65 | EMC sealing is available |
| 5 | ABPH1680WL | 169 / 188 | 82 / 86,4 | P3 | Die cast aluminium flat | 160 | 73 | IP65 | Integrated flanges bottom part along the profile |
Not found a suitable solution? CONTACT US.
The data are taken from catalogs and webpages of the manufacturers. Please check dimensions and other parameters before starting the project. We would be glad if you tell us about any errors you notice.
Aluprofile–enclosures image gallery:
