Topcover instrument cases 70 x 50 mm
Plastic instrument enclosures W × H = 70 × 50 mm for indoor and outdoor applications with up to IP65 protection are molded from ABS, ASA and ASA-PC plastics. The instrument cases are designed for sensors, interface units, compact control systems. Flanged versions with can be mounted on walls, ceilings and profiles with screws or cable ties.
All the dimensions are in mm.
Nearest neighbors:
| 60 | 70×60 2 enclosures |
80×60 2 enclosures |
|
| 50 | | 80×50 6 enclosures |
|
| 40 | 60×40 4 enclosures |
70×40 5 enclosures |
|
| 60 | 70 | 80 |
| Part number | Image | Length | Width | Height | Material | PCB max | IP max | Comment | |
| 1 | SIC5-7-2 |
 |
70 | 45 | 20 | ASA or ABS UL94 HB | 53×32 | | Screwless snap-in assembly, pillars for PCBs in the bottom part |
| 2 | SIM5-7-2W |
 |
70 | 45 | 22 | ASA or ABS UL94 HB | 53×32 | | Embedded wall mounting bracket, screwless snap-in assembly, pillars for PCBs in the bottom part. |
| 3 | SIC5-7-3 |
|
70 | 45 | 30 | ASA or ABS UL94 HB | 53×32 | | Screwless snap-in assembly, pillars for PCBs in the bottom part |
| 4 | SIM5-7-2W |
|
70 | 45 | 32 | ASA or ABS UL94 HB | 53×32 | | Embedded wall mounting bracket, screwless snap-in assembly, pillars for PCBs in the bottom part. |
| 5 | B182411x |
 |
70 | 50 | 15 | ASA+PC UL94 V-0 | 62×42 | IP65 | Two part case assembled with 4 Torx stainless steel screws. PCBs are fastened by hot caulking in the top and bottom parts. |
| 6 | B182412x |
 |
70/92 | 52 | 15 | ASA+PC UL94 V-0 | 62×42 | IP65 | Two part case assembled with 4 Torx stainless steel screws. Bottom part with flanges. PCBs are fastened by hot caulking in the top and bottom parts. |
| 7 | B182421x |
 |
70 | 50 | 20 | ASA+PC UL94 V-0 | 62×42 | IP65 | Two part case assembled with 4 Torx stainless steel screws. PCBs are fastened by hot caulking in the top and bottom parts. |
| 8 | B182412x |
 |
70/92 | 52 | 20 | ASA+PC UL94 V-0 | 62×42 | IP65 | Two part case assembled with 4 Torx stainless steel screws. Bottom part with flanges. PCBs are fastened by hot caulking in the top and bottom parts. |
Not found a suitable solution? CONTACT US.
The data are taken from catalogs and webpages of the manufacturers. Please check dimensions and other parameters before starting the project. We would be glad if you tell us about any errors you notice.
