Aluminium profile enclosures 80 x 40 mm
Standard aluminium enclosures, based on extruded profiles are listed below. The length of the profile can be easily changed, making it possible to obtain an enclosure of any depth.
Below you see the enclosures based on extruded profiles with cross section W × H = 80 × 40 mm.
All the dimensions are in mm.
Nearest neighbors:
50 | 80×50 10 series |
||
40 | 70×40 2 series |
| 90×40 9 series |
30 | 70×30 5 series |
80×30 9 series |
90×30 5 series |
70 | 80 | 90 |
Part number | Width | Height | Type | Front/end panels | Max PCB width | Max height inside | IP max | Comment | |
1 | X30-70 | 75,8 | 31,2 | P2 | Aluplates with sealing frame in 5 colours with integrated anti-slip enclosure feet | 70 | 27 | IP65 | Sealing frame in 5 colours with integrated anti-slip enclosure feet |
2 | AKG 71 32 | 71,5 | 32 | P2 | Aluplates | 67,5 | 28 | | Profile form a guide groove in the centre for insertion of PCB |
3 | ASP830 | 74 | 32,8 | P1 | Die cast aluminium flat; avail. mounting lid with hinged alu flap | 53 | 26,8 | IP68 | Battery compartment; side decor stripes; impact protection seals; tip-up feet; tower feet; wall brackets |
4 | ASPH830 | 74 | 32,8 | P2 | Die cast aluminium flat; avail. mounting lid with hinged alu flap | 53 | 26,8 | IP65 | Battery compartment; side decor stripes; impact protection seals; tip-up feet; tower feet; wall brackets |
5 | ASPU830 | 74 | 32,8 | P4 | Die cast aluminium flat; avail. mounting lid with hinged alu flap | 53 | 26,8 | IP40 | Battery compartment; side decor stripes; impact protection seals; tip-up feet; tower feet; wall brackets |
6 | AW8-5 | 75 | 40 | P1 | Die cast aluminium flat or flanged | 61,5 | 31 | IP68 | Heat-sink fins left and right sides, recessed area top and bottom |
7 | EX8-4-x | 80 | 40 | P3 | Flat or flanged from ABS or aluplates | 75 | 34,6 | IP65 | EMC sealing is available |
8 | EXH8-4-x | 80 | 40 | P3 | Aluplates flat or flanged | 75 | 30,3 | | Waved heat-sink fins on top of the profile; EMC sealing is available |
Not found a suitable solution? CONTACT US.
The data are taken from catalogs and webpages of the manufacturers. Please check dimensions and other parameters before starting the project. We would be glad if you tell us about any errors you notice.
Aluprofile–enclosures image gallery:




Type | Icon | Product example | Description |
P1 | ![]() |
Closed (tube) extruded aluminium profile | |
P2 | ![]() |
The shell consists of two equal extruded parts | |
P3 | ![]() |
Horizontally divided profile from two different extruded parts | |
P4 | ![]() |
U-form opened extruded profile and and flat cover plate | |
P5 | ![]() |
Slope closed (tube) extruded aluminium profile | |
P6 | ![]() |
Slope two-part extruded profile | |
P7 | ![]() |
Extruded sidewalls; upper and lower part of the shell made of aluminium sheet |