DIN-rail enclosures 57..70 mm wide

The plastic DIN-rail enclosures 56,9..70 mm wide are designed for mounting on standard DIN EN 60715 TH35 rails. All enclosures are designed to connect a large number of wires. Each enclosure has a large internal space for mounting printed circuit boards and electronic components.

Nearest neighbors:

width 3M 4M
3M width
13 series
4M width
9 series
mm 53 67,5 72
Serie Image Type Width Height Depth Material Comment
1 ME IO 56,4E B 10U Enclosure system for I/O modules designed for mounting on DIN rails D5
 56,9 124,3 95,9 PA UL94 V-0 Flat and L-shaped base; bus connectors 8 poles, 2,54 mm pitch or 5 poles, 3,81 mm pitch
2 ME Up to three connection levels on the cover of the enclosures D5
 67,5 99 114,5 PA UL94 V-0 Three-stage cover for multiple contacts; ground contact; bus connector up to 12-pin, 3.5, 5, or 7.25 mm pitch
3 ME MAX Family of DIN rail enclosures with large interior space for electronic assembly D5
 67,5 99 114,5 PBT UL94 V-0 Up to 90 poles; standard terminals with 3.5 mm to 7.5 mm pitch. Bus connectors 5 poles, 3,81 mm pitch; ground contact.
4 CNT 67 Modular housing with up to 3 connectors levels D5
 67,5 99 114,5 PA UL94 V-0 Ventilation slots; bus connectors 5 poles, 3,81 mm pitch; ground contact. IP20 / DIN EN 60529.
5 EH high/flat Plastic housing system for industrial applications D5
 70 75,4 53,5 / 110,5 ABS / ABS- PC UL94 HB/V-0 Two height versions, t=-40°C..+80°C
All the dimensions are in mm.

See also the DIN-rail profile enclosures which allow to build an enclosure any width.

See also the Adapters for DIN-rail used to fix an universal enclosure on DIN-rail.

Not found a suitable solution?   CONTACT US.
The L-shaped stepped design of the enclosures allows for two-level connector placement.
Low-profile version of the base housing with screw terminals
Bis zu drei Ebenen mit verschiedenen Arten von Anschlüssen auf beiden Seiten des Gehäuses
Universal housing for DIN rail devices
The data are taken from catalogs and webpages of the manufacturers. Please check dimensions and other parameters before starting the project.  Please let us know  if you notice an error.