DIN-rail enclosures narrower than 17 mm

Plastic enclosures with a width of 6,2..15 mm for mounting on DIN rails (according to DIN EN 60715 TH35) allow maximum utilization of the interior space in distribution boxes. Despite the minimal width of the enclosure, they offer a sufficient number of cable connections (up to 26 contacts). Vertical mounting of the circuit boards is required. Most models are available with terminal connections that are already integrated into the housing or specially developed for this purpose.

Nearest neighbors:

width 1M
1M width
12 series
20..30mm width
13 series
mm <17 17 22,5
Serie Image Type Width Height Depth Material Comment
1 D14-10 Electronic enclosure with 5 built in screw terminals D6
 6,2 90 77,9 PC/ABS UL94 V-0 The narrowest enclosure for DIN rail in the catalog, the housing as wide as a terminal block. 5 screw termianls and 4 contact points
2 D12-10 Dark gray design with bus connection, ventilation slots, and hinged transparent cover D6
 6,3 93,1 101,2 PBT UL94 V-0 The narrowest housing with a bus connector (5 poles, 3,81 mm); 8 screw terminals integrated
3 D14-11 DIN rail housing with transparent hinged cover and optional side door D6
 6,5 90 99,3 PA66 UL94 V-0 6 or 10 screw terminals integrated, hinged transparent cover, version with side door
4 D14-12 Screw terminals are built in the enclosure. D6
 7,8 90 99,3 PA66 UL94 V-0 6 or 10 screw terminals integrated
5 D14-13 DIN rail (EN 60715) mounting enclosures with integrated terminals D6
 10,1 90 99,3 PA66 UL94 V-0 6 or 10 screw terminals integrated
6 D29-18 Indication panel with 18 LED holes on the front side D5
 12 100 80 PC For use with 18-pin PCB direct connector, cross-connection via 8-pin bus connector; ground contact.
7 D14-14 The housing includes one base with fitted terminals, one cover, one front hinged transparent panel. D6
 12,5 90 99,3 PA66 UL94 V-0 12 or 20 screw terminals integrated, version with side door
8 D19-10 DIN rail housing with 8 connection poles on two levels D5
 12,5 99 114,5 PA UL94 V-0 Two-stage cover for multiple contacts; ground contact; bus connector up to 12-pin.
9 D12-20 Dark gray version with ventilation slots D5
 12,5 99 114,5 PBT UL94 V-0 5 poles, 3,81 mm pitch pitch bus connection; ground contact
10 D13-10 12.5 mm wide housing with three levels for horizontal connections, transparent hinged cover D5
 12,5 99 114,5 PA UL94 V-0 Three levels for connectors on each side; bus connector 5-pin, 3.81 mm pitch; grounding contact
11 D14-15 The enclosure includes one belt with fitted terminals, two side walls, one front hinged transparent panel. D6
 15 90 99,3 PA66 UL94 V-0 12 or 20 screw terminals integrated
All the dimensions are in mm.

See also the DIN-rail profile enclosures which allow to build an enclosure any width.

See also the Adapters for DIN-rail used to fix an universal enclosure on DIN-rail.

Not found a suitable solution?   CONTACT US.
The side door provides access to the memory card, DIP switches, or configuration potentiometers
Rail-mounted housing for industrial control systems
6.5 mm wide housing for DIN rail with 8 contacts
Plastic case without ventilation slots, with ground contact
The data are taken from catalogs and webpages of the manufacturers. Please check dimensions and other parameters before starting the project.  Please let us know  if you notice an error.